SINGULAR W4G

Remotely manageable alarm monitoring communicator with WiFi primary and LTE Cat-M1 backup connection.

 

   Physical phone line (TIP/RING) emulation for the alarm panel
   Forwards Contact ID signals of the alarm panel towards the IP receiver
    Audio output in order to check the communication on emulated phone line

Description

Remotely manageable alarm monitoring communicator with WiFi primary and LTE Cat-M1 backup connection.

The SINGULAR W4G alarm monitoring communicator interprets Contact-ID or SIA FSK protocol (over simulated phone line), and translates to SIA DC-09 IP-based format, then sends it to the address of the set-up telemonitoring receivers.

Signaling exclusively depends on the existence of the permanent WiFi connection, thus several WiFi access points can be set up to handle any possible router or service errors.

In order to keep the higher security level, has 4G mobile communication extension, too.

  • Setup using a WEB browser, on a platform independent mobile phone or PC
  • Remote serial connection with almost any security or fire alarm control panel
  • Smartphone controllable on the outputs of the contact, open/close, on a maximum of 2 partitions
  • Listen to communication on TIP/RING line to make installation easier
  • Primary WiFi and alternate GPRS connection
  • Minimum communication cost, only for alternate signaling
  • Wide range (WIFI 802.11 b/g/n)
  • High-tech 4G network connection

Usage Areas

  • Providing a IP path for forwarding of Contact ID reports from Alarm panel to monitoring station
  • Remote programming of Alarm panels, Fire panels, or any standalone device with serial connection to a software (vending machines, car diagnostic, sensor reading..), through internet
  • Complete supervision of alarm system from smartphone:
    • Identified Control (arm/disarm) without keypad
    • 3 notification interfaces: Status viewing, event list review and “push notification” warnings
    • Events filtering and displaying differently (alarm, arming, trouble, …)
    • Displaying of alarm system status (armed, trouble, online, etc…)
    • Multiple devices in one Smartphone account (home, office, weekend house, etc…)
    • One device can be added to many accounts, more notified persons at the same time.

Advantages of SINGULAR W4G Internet based alarm monitoring communicator

  • Dual signal transmission via WIFI and / or cellular data network
  • Unlimited number of reports and users
  • Simple installation ( NO router settings)

Applications

You can download the application from play shop (iOS, Android). Look for a PULOWARE CLIENT, with a icon looking like show 

 WLAN2.4GHz
 Cellular BandsLTE (B1/B3/B7/B8/B20/B28A)
 Loop current25mA
 Power9-30V DC
 Impedance100-470 Ohm
 Dial tone425 Hz
 Line voltage48V
 Operating temperature0 … +70°C
 Dimension75 x 90 x 25 mm

 

Technical specifications

 SINGULAR W4G
HARDWARE SPECIFICATIONS 
Controlled outputs2
Emulated Phone line (TIP/RING)Yes
Status signaling with multicolor LED lightYes
Serial port connection for alarm remote programmingYes
Acoustic supervisionYes
Removable terminalsYes
Metal housingYes
DEVICE FEATURES 
Transmission chanelsWifi / LITE
Contact ID messages forwardingYes
Number of adressable monitoring receives2
Communication protocol to monitoring receiverSIA DC-09
Transmission for change of programmingYes
Overwriting the user identification numberYes
Report forwarding regardless on phone number dialedYes
Customizing test report codeYes
Password protectionYes
WEB SERVICE FUNCTIONS 
Remote device setting, status checkYes
Firmware upload through WEB siteYes
Transparent serial port for remote programming of alarm panelYes
Controll outputsYes
Device restartYes
SMARTPHONE FUNCTIONS 
Remote arming/disarming with onboard relay (keyswitch)Yes
Selectable “push notification” on CID messagesYes

Downloads