UP200 VoLTE M2 4G upgrade board (PCB) for UP200-GSM and UP-200 VoLTE intercoms

Upgrades UP200-GSM, UP200-GSM RD, UP-200 VoLTE, UP-200 VoLTE RD, AS1-GSM and AS2-GSM to the 4G UP200 VoLTE M2
Swap the board, keep the housing, mounting and cabling
4G VoLTE calls, with UMTS/GSM fallback where available
Gate control by free call for up to 100 phone numbers
Setup with the free PC Configurator over USB, remote changes by SMS

In short: Already have UP200 intercoms installed? This board replaces the electronics inside UP200-GSM, UP200-GSM RD, UP-200 VoLTE, UP-200 VoLTE RD, AS1-GSM and AS2-GSM units and turns them into a UP200 VoLTE M2 4G intercom – the same functions as a new unit. The housing, mounting and cabling stay; only the board is swapped.

Which intercoms it upgrades

Installed model	Call buttons	After the swap
UP200-GSM	2	UP200 VoLTE M2
UP200-GSM RD	1	UP200 VoLTE M2 RD
UP-200 VoLTE	2	UP200 VoLTE M2
UP-200 VoLTE RD	1	UP200 VoLTE M2 RD
AS2-GSM	2	UP200 VoLTE M2
AS1-GSM	1	UP200 VoLTE M2 RD

Why upgrade now

When 2G is switched off, GSM intercoms stop calling. The upgrade board brings existing units to 4G VoLTE without a new installation – no new housing, no new mounting, no new cabling. See the switch-off dates in our 2G shutdown guide.

Upgrade in 4 steps

Switch off the power and open the housing.
Unscrew the old board and fit the new one – no remounting.
Insert a VoLTE-enabled SIM card (voice and data, APN set).
Set up with the free PC Configurator over USB and make a test call.

Ordering

Usually supplied for upgrade projects in larger quantities; smaller orders when stock allows, mostly on pre-order. Project quote: office@dupol.eu. Partner prices are shown after registration.

After the upgrade, your intercom can:

Your upgraded unit works as a UP200 VoLTE M2 – an intercom and access control unit operating on 4G mobile networks.

Features

2-way speech communication
Managed remotely via the website
Operates on 2G/3G/4G mobile networks (VoLTE / UMTS / GSM)
Remote-controllable relay output for gate opening
USB port for PC configuration
Operating temperature range: -30°C to +60°C
Power voltage range: 9-16 VDC
Outdoor protection rating: IP44

Application area

Wireless intercom system for private homes, resorts, offices, and other premises
Remotely controllable access control unit
Keyless door opening
Garage door opening and closing by phone
Emergency call unit
Info columns

Functions

Wireless 4G GSM intercom with 1 or 2 pushbuttons (depending on your housing), for 1 or 2 apartments
Up to 2 phone numbers can be assigned to each pushbutton (primary and secondary)
Gate control by free call; up to 100 user phone numbers can be configured
Electric strike control via the phone keypad during a call, or via an external pushbutton
SMS forwarding, e.g. for prepaid SIM balance information
Configuration via USB using the PC software
Remote configuration by SMS command

Operation

When a visitor presses one of the call buttons, the unit calls the phone number(s) assigned to that button and establishes a voice connection for a configurable duration. The call ends automatically when the configured time expires, when the called party hangs up, or if the call is not answered.

The relay output for gate or door control can be activated in three ways: by a free call from a configured phone number, by pressing either call button, or by pressing “2#” on the phone keypad during an active call.

Intercom Configurator

Version	2 buttons, 1 button (RD)

Technical specification

Parameter	Value
Power supply	9-16 VDC (typical 12 VDC)
Current consumption at 12 VDC	30-400 mA
Relay output load	30 V / 2 A
Voltage output at 12 VDC	11 V / 1 A
Operating temperature	-30°C to +60°C
Outdoor protection	IP44
Network operation	VoLTE / UMTS / GSM
Dimensions (H × W × D)	165 × 122 × 40 mm
Pushbuttons	2 (for 2 apartments)

Downloads

UP200-VoLTE M2 – Advanced Cellular Intercom & Access Control Unit

Engineered & Assembled in the EU

The UP200-VoLTE M2 is a heavy-duty, highly reliable wireless intercom system operating on modern 4G mobile networks. It allows property owners to receive visitor calls and control entry points from anywhere via their mobile or landline phones. Built on a field-proven platform with over 10 years of R&D, it is the ultimate “install-and-forget” solution for security professionals.

⚡ Technical Specifications

Parameter	Minimum	Typical	Maximum	Unit
Power Supply	9	12	24	VDC
Current Consumption (at 12VDC)	30	40	400	mA
Relay Output Load	–	–	30 / 2	V / A
Voltage Output (at 12VDC)	–	11	–	V / 1A
Operating Temperature	-30	–	+60	°C
Outdoor Protection	–	IP44	–	–
Dimensions (H x W x D)	–	165 x 122 x 40	–	mm

*Note: When operated with an electric lock, the minimum power requirement is 15VA

🛠️ Key Features for Installers

Versatile Layouts: Available with 1 or 2 mechanical pushbuttons for 1 or 2 apartments/offices
Smart Call Routing: Up to 2 phone numbers can be assigned per button with automatic failover to the secondary number if the primary fails
Free Gate Control: Caller ID recognition allows up to 100 authorized users to trigger the gate via a free call
Dual Output Control: Equipped with 1x Relay output (NO/NC) and 1x Voltage output (VOUT). Outputs can be activated via phone keys during a conversation (1# for VOUT, 2# for Relay)
ECO-Forwarding: Automatically forwards incoming SMS messages (e.g., prepaid SIM balance alerts) to a designated number to prevent service interruptions

💻 Configuration

PC Software: Fast configuration via USB using the Configurator v3.09 desktop application. Download the official setup wizard directly from: the Downloads tab (UP200 Configurator) (Windows XP, 7, 8, 10, 11 compatible).
Remote SMS Commands: Fully configurable and queryable remotely via secure, password-protected SMS commands

📦 Package Contents

UP200-VoLTE intercom unit, 4G antenna, USB A / Mini-B 5-pin cable, Antenna bracket + fixing screws

Reviews

There are no reviews yet.

Be the first to review “UP200 VoLTE M2 4G Upgrade Board (PCB)”

UP200 VoLTE M2 4G Upgrade Board (PCB)