Remote manageable 3g alarm monitoring communicator with HSPA/GPRS primary and PSTN backup connection
The SC-3G device is a modern remote monitoring communicator which operates on the 3G/2G mobile network, converts the Contact ID signals of alarm control panels into SIA DC-09 digital format and forwards to the predefined remote monitoring station’s receivers. The signals are embedded in TCP or UDP packages and sent over 3G data (HSPA) and 2G data (GPRS) network.
If the mobile network connection is defected or the monitoring receivers are unavailable, the communicator provides a secondary option for report sending, switching to PSTN network connection. For increasing the security of signal transmission landline or another backup communicator can be connected to the PSTN input, if it fits to the standard alarm control panels’ communication. security products
Besides this, additional device features are provided through connection to an IoT service server. This service allows connection to the device through a simple web browser, to review status and events, control the device, or change device firmware. Also, it allows remote connection to the alarm device with a transparent serial port, and the support for the Smartphone application, used by the alarm system user to receive information from alarm system and control it.
Main features
- IP-based signaling of Contact ID codes
- Internet endpoint access (IoT) over the WEB and smartphone
- Serial connection to the alarm control panel security products
- 2 IP receivers can be set up
- Monitoring PSTN line with alternate communication
- Notification logic taken over from the alarm control panel
Functions of security products
- Signal transmission over 3G network
- Automatic or predefined Contact ID signal transmission logic
- Signal transmission triggered with contact inputs
- Status events reporting (supply failure, setup changed, etc.)
- Output control by SMS commands or through Smartphone application
- PSTN Pass-through connection, for backup communication
- Providing TCP/IP or UDP connection to SIA DC 09 receiver
- Configuration and diagnostic via USB connection or through Internet connection ( Server)
- Test report setting from 30 to 600 sec
Applications
You can download the application from play shop (iOS, Android). Look for a PULOWARE CLIENT, with a icon looking like show 
Programming of remote 3g alarm monitoring communicator
Phisical properties
| Cellular Bands | HSPA (800/ 850/ 900/ 1900/ 2100MHz) |
| Loop current | 25mA |
| Power | 9-24V DC |
| Power consumption (max.) | 1A @ 12V DC |
| Power consumption (idle) | 100mA @ 12V DC |
| Max. voltage on relay output | 60V DC |
| Max. current on relay output | 2A |
| Impedance | 100-470 Ohm |
| Dial tone | 425 Hz |
| Line voltage | 48V |
| Operating temperature | 0 … +70°C |
SC-3G user manual v1.1 (en): 
SC-3G configurator: